• Internal Cam Springs allow a much more compact camming unit.
• With this system, Aliens fit into smaller placements and have more cam
• surface area per width than other units.

• ---




• Control Sheath operation allows true flexibility of the main
• cable stem AND solid cam control. Cam walk and placement change are minimized.
• Deeper placements are possible, but don't place the stem over sharp edges
• or so that permanent bending or damage will occur when the unit is weighted.

• ---




• Secure grip and control. Easy clipping and racking are provided
• by the cable loop. Aliens are available with or without a sewn Spectra
• runner.

• ---




• Axles are machined from hardened stainless steel which is corrosion
• proof and resists flex. Also. the Internal Spring system allows the axle
• length to be minimized, which results in a short and virtually unbendable
• axle.

• ---




• Cams are machined from 6061-T6 Aluminum extrusions, a grippy
• alloy with TEETH.

• ---




• Moderate cam angle of 16 degrees for greater holding power.

• ---




• Sturdy aluminum handle and top puller are crimped to woven stainless
• tubular sheath material. A tubular nylon "Sock" provides abrasion resistance.
• The sheath can be taped, but don't tape tightly or it will cause drag
• in the operation.

• ---




• Quality connections. The main cable is individually silver brazed
• 10mm deep to the stainless cable eye fitting. Nicopress copper cable fittings
• are used for the swaged connections.

• ---




• Quality control. All machined parts are manufactured in our
• shop with modern computer numeric controlled equipment. This allows us
• to control the manufacturing processes from start to finish, eliminating
• possible errors from outside contractors.

SIZE	COLOR	WEIGHT (gms)	RANGE (inches)	MAINCABLE CONSTRUCTION	STRENGTH
REGULAR UNITS � MAXIMUM FLEXIBILITY
.33		64	.33-.55	5/32�- 7x19	1860
3/8		68	.39-.67	��	2200
1/2		70	.53-.86	��	2500
3/4		78	.61-1.0	��	2700
7/8		77	.68-1.2	5/32�- 7x19	��
1.0		82	.78-.1.3	��	��
1.25		109	.97-1.5	��	3300
1.5		120	1.0-1.6	3/16�- 7x19	3500
2.0		124	1.2-1.95	3/16�- 7x7	��
2.5		136	1.4-2.3	��	��
HYBRID UNITS � FOR PIN SCARS AND FLARING PLACEMENTS
.33-3/8		65	.33-.67	5/32�-7x19	1860
3/8-1/2		69	.39-.86	��	2100
1/2-3/4		71	.53-1.0	��	2500
3/4-1		78	.61-1.3	��	2700
7/8-3/4		74	.61-1.2	��	��
7/8-1.0		78	.68-1.3	��	��
SUPER LONG UNITS (SL�S) � APPROX 0.75� LONGER UNIT, 4� SHORT RUNNER
3/8		68	.39-.67	5/32�-7x7	2200
1/2		71	.53-.86	��	2500
3/4		79	.61-1.0	��	2700
7/8		82	.68-1.2	5/32�- 7x19	��
1.0		83	.78-.1.3	5/32�-7x7	��
1.25		110	.97-1.5	3/16�- 7x7	3300
1.5		121	1.0-1.6	��	3500
2.0		125	1.2-1.95	��	��
2.5		137	1.4-2.3	��	��

BREAKING STRENGTHS are for units placed in ideal conditions (80% cam closure in parallel granite).